Loading ...
Loading ...
Loading ...
3-10 Pre-driving checks and adjustments
INTELLIGENT KEY OPERATION
You can lock or unlock the doors without taking
the key out from your pocket or bag.
When you carry the Intelligent Key with you, you
can lock or unlock all doors by pushing the door
handle request switch (driver’s or front passen-
ger’s)
*
A
or rear hatch request switch
*
B
within
the range of operation.
When you lock or unlock the doors or the rear
hatch, the hazard indicator will flash and the horn
(or the outside chime) will sound as a confirma-
tion. For details, see “Setting hazard indicator
and horn mode” later in this section.
Locking doors
1. Push the power switch into the OFF position
and make sure you carry the Intelligent Key
with you.*1
2. Close all the doors and the rear hatch.
3. Push the door handle request switch (dri-
ver’s or front passenger’s)
*
A
or the rear
hatch request switch
*
B
while carrying the
Intelligent Key with you.*2
4. All the doors and the rear hatch will lock.
5. The hazard indicator flashes twice and the
outside chime sounds twice.
*1: Doors will not lock with the Intelligent Key
while the power switch is in the ACC or ON
position.
*2: Doors will not lock by pushing the door
handle request switch when the Intelligent Key is
left inside the vehicle. However, when an
Intelligent Key is inside the vehicle, doors can
be locked with another registered Intelligent Key.
CAUTION
. After locking the door using the
request switch, make sure that the
doors have been securely locked by
operating the door handles.
. When locking the doors using the
request switch, make sure to have
the Intelligent Key in your posses-
sion before operating the request
switch to prevent the Intelligent Key
from being left in the vehicle.
. The request switch is operational
only when the Intelligent Key has
been detected by the Intelligent Key
system.
Unlocking doors
1. Push the door handle request switch
*
A
or
the rear hatch request switch
*
B
once while
carrying the Intelligent Key with you.
2. The hazard indicator flashes once and the
outside chime sounds once. The corre-
sponding door or the rear hatch will unlock.
3. Push the door handle request or the rear
hatch request switch again within 1 minute.
4. The hazard indicator flashes once and the
outside chime sounds once again. All the
doors and the rear hatch will unlock.
All doors will be locked automatically unless one
of the following operations is performed within 1
minute after pushing the request switch while
the doors are locked.
Loading ...
Loading ...
Loading ...