Dji MATRICE 600 PRO User Manual

Loading ...

Unfolding the Aircraft

1. Gently lift the frame arm. Twist the red knob to lock each arm in place. To store, untwist the knob

and lower the frame arm.

2. Unfold the propellers.

3. Unfold the GPS-Compass Pro and ensure that all the arrows on the GPS-Compass Pro point

toward the front of the aircraft.

Installation

Mounting the Landing Gear

1. Ensure the screw on the landing gear leg is pointing in the same direction as the gap next to the

knob on the landing skid. Insert both landing gear legs into a corresponding landing skid, rotate

the landing gear leg until it is fully seated into the landing skid, and then secure it in place by

tightening the knob.

2. Ensure the hook on the landing gear leg is facing toward the outside of the aircraft, then attach it to the

connector on the aircraft body. Rotate the landing gear leg until it is fully seated into the connector.

3. Connect both springs to the center frame and the landing gear legs. Mind your fingers when

mounting the springs.

Note the

orientation

Note the

Orientation

Attach

For storage, remove the landing gears, lower the retractable modules, then lower the frame

arms to prevent damage.

Loading ...

Dji MATRICE 600 PRO Fly Camera