Loading ...
Loading ...
Loading ...
50
©
2017 DJI All Rights Reserved.
MATRICE 600 PRO
User Manual
Specications
Operating Voltage 6S LiPo Input Signal PWM (High-Pulse Width 800 - 2200us)
Operating Current Max 1 A @ 6S LiPo Output Signal
PWM (Mid Position is 1520us) in 90
Hz
Operating
Temperature
-20° to 70° C Output Voltage 6 V
Total Weight 742 g Servo Travel 150° (Min 120°)
If the LED is solid yellow after calibration, a problem has occurred. Ensure that the servos
are mounted correctly and then try again.
Avoid obstructions during calibration. If the landing gear was obstructed, recalibration will
be required, per the above steps.
If the “R” and “L” servo cables are reversed, travel will not be measured correctly. Fix the
connections and recalibrate the landing gear using the above steps.
Landing gear servo travel has been pre-calibrated. Mechanical adjustment of the servo
travel is not recommended.
LED Description
— Solid Green System normal
Blinking Green Rapidly
Calibration required
Blinking Green Slowly Recalibration required
— Solid Yellow Calibration failed
Blinking Yellow Rapidly Enter calibration mode
Blinking Yellow Slowly System calibrating
— Solid Red Servo stalled
Blinking Red Rapidly Unsafe startup alert
Blinking Red Slowly Input signal abnormal
Loading ...
Loading ...
Loading ...