Loading ...
Loading ...
Loading ...
20
©
2017 DJI All Rights Reserved.
MATRICE 600 PRO
User Manual
By default, the landing gear will not raise or lower if you toggle the control switch when the
aircraft is on the ground. Go to the DJI GO app > Camera View > > Advanced Settings >
Disable Landing Gear Auto-Lock, and then the landing gear will raise or lower if you toggle
the control switch when the aircraft is on the ground. Ensure that the switch is in the lower
position when enabling this feature. The feature will be disabled after raising and lowering the
landing gear once. Enable it in the DJI GO app if you want to raise or lower the landing gear
again.
Auto-raise and auto-lower features of the landing gear can be set in the DJI GO app. Go to
the DJI GO app > Camera View > > Advanced Settings > Self-Adaptive Landing Gear.
Connecting Mobile Device
1. Press the button on the side of the Mobile Device Holder to
release the clamp.
2. Place your mobile device inside the clamp and adjust it to secure
your mobile device.
3. Connect your mobile device to the remote controller via a USB
cable.
RTH Button
Press and hold this button to start the Return-to-Home (RTH)
procedure. The LED around the RTH Button will blink white to
indicate the aircraft is entering RTH mode. The aircraft will then
return to the last recorded Home Point. Press this button again to
cancel the RTH procedure and regain control of the aircraft.
1. Raise: Raise the landing gear to its upper most position. The landing gear will automatically raise
when the aircraft reaches an altitude of 1.2 m for the rst time.
2. Lower: The landing gear will lower to its lowest position for landing. The landing gear will
automatically lower if Auto-Landing is enabled in the DJI GO app or when the aircraft is landing
automatically as part of the RTH procedure.
Loading ...
Loading ...
Loading ...