Loading ...
Loading ...
Loading ...
©
2017 DJI All Rights Reserved.
25
MATRICE 600 PRO
User Manual
Remote Controller Calibration
Stick Mode
Button Customization
Not DefinedC1
C2 Not Defined
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back of the RC.
Searching for aircraft frequency,
timeout in 54 seconds
Cancel
Press the linking button on the aircraft
to link this remote controller
Remote Controller Settings
Linking Remote Controller
3. The remote controller Status LED will blink blue and beep to indicate that the remote controller is
ready to be linked.
4. Press the LINK Button on the Lightbridge 2 Air System (shown in the gure below) to begin linking.
The remote controller Status LED will glow solid green if linking is successful.
The remote controller cannot link to the aircraft or control aircraft movement if it is set
to secondary. Set the remote controller as primary in the DJI GO app if you want to link
the remote controller to the aircraft.
The remote controller will disconnect from the linked aircraft if another remote controller
attempts to link to the same aircraft.
LINK Button
Loading ...
Loading ...
Loading ...