Loading ...
Loading ...
Loading ...
©
2017 DJI All Rights Reserved.
27
MATRICE 600 PRO
User Manual
1 Record Home Point (HP)
Flashing Green
5 Go Home(20m can be set)
Flashing Yellow Rapidly
3 Remote Controller Signal Lost
Flashing Yellow Rapidly
2 Conrm Home Point
Flashing Green
6 Landing after Hovering 15secs
Flashing Yellow Rapidly
4
Signal Lost Lasts 3secs.
Flashing Yellow Rapidly
Height over HP>20m
Elevate to 20m
Height over HP<=20m
20m
Battery Level Description
Aircraft Status
Indicator
DJI GO App
Flight
Instructions
Low Battery
Warning
The battery level is
low. Please land the
aircraft.
Aircraft Status
Indicator
blinking RED
slowly.
Tap Go-Home to make the
aircraft return to Home Point
and land automatically, or
Cancel to resume normal
ight. If no action is taken,
the aircraft will automatically
return to the Home Point
and land after 10 seconds.
Fly the aircraft
back and land
it as soon as
possible, then
stop the motors
and replace the
battery.
Critical Battery
Warning
The aircraft must
land immediately.
Aircraft Status
Indicator
blinking RED
rapidly.
The DJI GO app screen
will ash red and the
aircraft will begin to
descend.
The aircraft
will begin
to descend
and land
automatically.
Remaining
Flight Time
Estimated remaining
ight time based on
the current battery
level.
N/A N/A N/A
When the critically low battery level warning is triggered and the aircraft is descending
to land automatically, you may push the throttle stick upwards to hover the aircraft and
navigate it to a more appropriate location for landing.
Color zones and markers on the battery level indicator reect the estimated remaining ight
time and are adjusted automatically, according to the aircraft’s current status.
Failsafe RTH
Failsafe RTH is activated automatically if the remote controller signal (including video relay signal)
is lost for more than 3 seconds provided that the Home Point has been successfully recorded and
the compass is working normally. The operator can interrupt the Return-to-Home procedure and
regain control over the aircraft if the remote controller signal is recovered.
Failsafe Illustration
Loading ...
Loading ...
Loading ...