Dji MATRICE 600 PRO User Manual

Loading ...

MATRICE 600 PRO

User Manual

The aircraft cannot avoid obstruction during RTH, therefore it is important to set a

reasonable RTH altitude before each ight. Go to the DJI GO app > Camera View >

> Set Return-to-Home Altitude.

20m

If the aircraft is flying under 20 meters (65 feet) and RTH (including Smart

RTH, Low Battery RTH and Failsafe RTH) is triggered, the aircraft will first

automatically ascend to 20 meters (65 feet) from the current altitude and you

cannot control the aircraft during ascending. In Smart RTH, you can exit RTH to

cancel the ascending by pressing the RTH button once.

20m

The aircraft automatically descends and lands if RTH is triggered when the

aircraft ies within a 65 feet (20 meter) radius of the Home Point.

Aircraft cannot return to the Home Point when GPS signal is weak (

displays red) or unavailable.

The aircraft will stop ascending and immediately return to the Home Point if you

move the throttle stick during Failsafe RTH.

Updating the Home Point

You can update the Home Point in the DJI GO app during flight.

There are two options for setting the Home Point:

1. Set the aircraft’s current coordinates as the Home Point.

2. Set the remote controller’s current coordinates as the Home Point.

RTH Safety Notices

GPS

Follow the instructions below to update the Home Point:

1. Connect your mobile device to the remote controller and go to the DJI GO app > Camera View > .

2. Tap to set the remote controller’s current coordinates as the Home Point; tap to set the

aircraft’s current coordinates as the Home Point.

3. The Aircraft Status Indicator will blink green to indicate that the new Home Point has been set

successfully.

Ensure the space above the GPS module (shown in the

gure) is not obstructed when updating the Home Point.

Loading ...

Dji MATRICE 600 PRO Fly Camera