Dji MATRICE 600 PRO User Manual

Loading ...

DJI Assistant 2

When using your Matrice 600 Pro for the rst time, activate it in the DJI Assistant 2 software.

Installation and Launching

1. Download the DJI Assistant 2 installation le from the ofcial DJI website:

http://www.dji.com/matrice600-pro/info#downloads

2. Complete the installation for the DJI Assistant 2 software.

3. Launch the DJI Assistant 2 software.

Using the DJI Assistant 2

1. Ensure that all the six Intelligent Flight Batteries are fully charged and then install them.

2. Power on the remote controller, and then turn on one of the Intelligent Flight Batteries in the

aircraft. If other batteries are not triggered automatically, connect your mobile device to the remote

controller and go to the DJI GO app for information.

3. Connect the Micro USB port (at the bottom of the Aircraft Status Indicator) of the Matrice 600 Pro to

the computer with a Micro USB cable. Do not disconnect the cable until conguration is nished.

4. When a connection is established, the software will display the connected devices: “M600 Pro”

and “Lightbridge 2”. Click the corresponding device to congure settings.

If the software doesn’t display both of the connected devices, check the USB connection

between the aircraft and the computer, and the driver on your computer.

M600 Pro

Activating the Aircraft

When using your Matrice 600 Pro for the first time, click on the “M600 Pro” icon and you will be

prompted to activate the aircraft on your computer. Follow the steps on-screen to activate the aircraft.

Basic Settings

Modular Redundancy System

Identify the module according to the number of times the module’s LED blinks (e.g. If a GPS blinks

once, it is “GPS1”). Then enter each module’s corresponding mounting position into the appropriate

elds. Ensure that the values are correct, or else the aircraft’s positioning will be off.

DJI Device

If using the D-RTK GNSS, enter the antenna mounting positions into the appropriate elds.

SDK

Enable API Control

If you are using the DJI SDK, select Enable API Control to allow the flight control system to

communicate with external devices such as an on-board computer. The external device will be able

to control the aircraft only if the Flight Mode Switch on the remote controller is toggled to F-mode. For

information on setting the API parameters, read the related documents and manuals on the DJI SDK

page of the DJI Developer website (https://developer.dji.com).

Loading ...

Dji MATRICE 600 PRO Fly Camera