Loading ...
Loading ...
Loading ...
24
©
2017 DJI All Rights Reserved.
MATRICE 600 PRO
User Manual
Status LED Alarm Remote Controller Status
—
Solid Red chime
T
he remote controller is set as primary but is
not connected to the aircraft.
—
Solid Green chime
T
he remote controller is set as primary and
connected to the aircraft.
—
Solid Purple 2 beeps
T
he remote controller is set as secondary but is
not connected to the aircraft.
—
Solid Cyan 2 beeps and chime
T
he remote controller is set as secondary and
connected to the aircraft.
Blinking Red 1 slow beep repeating
Remote controller error. Refer to the DJI GO app
for details.
RTH Status LED Sound Aircraft Status
—
Solid White chime RTH procedure begins.
Blinking White 1 beep repeating Sending RTH command to the aircraft.
Blinking White 2 beeps repeating Aircraft RTH in progress.
Linking the Remote Controller
The remote controller is linked to your aircraft by default. Linking is only required when a new remote
controller is used for the rst time. Follow these steps to link a new remote controller:
1. Power on the remote controller and connect it to your mobile device. Then power on the aircraft.
2. Go to the DJI GO app > Camera View > > Remote Controller Settings > Linking Remote
Controller.
Remote Controller Settings
Remote Controller Calibration
Stick Mode
Button Customization
Gimbal Pitch/YawC1
C2 Not Defined
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back of the RC.
Linking Remote Controller
Loading ...
Loading ...
Loading ...