Loading ...
Loading ...
Loading ...
21
Replacing the Gas Cylinder
DANGER
IMPORTANT: Use only the argon gas cylinder type
specified in this manual with this appliance. Use of any
other type gas or cylinder may result in explosion, fire
and personal injury.
WARNING
To avoid personal injury, use only the included gas
pressure regulator or a Dacor specified replacement.
Replace the gas cylinder when any of the red lights
come on solid or when Check Gas Supply message
appears on the screen.
1. Open the door on the front of the unit. Then
swing the spout cover to the up position.
2. Slide the power switch, located on the left side
of the bottle bay, all the way down to the OFF
position.
3. Grasp the regulator assembly with one hand and
turn the used gas cylinder counter-clockwise
until is comes loose. Discard the empty canister
in your regular trash. The canister is not refill-
able and therefore should not be disposed of in
the recycle bin.
Care and Cleaning
Spout cover
release lever
(on bottom of
spout cover)
ON
OFF
4. Remove the plastic cap from the top of the new
gas cylinder.
5. Insert the top of the new gas cylinder into the
bottom of the gas regulator assembly and turn
clockwise until snug. Do not over-tighten.
6. Turn the regulator knob in the ON direction until
it stops.
7. Slide the power switch all the way up to the ON
position. The system will run through a series of
self-tests, which could take up to approximately
5 minutes. Once this process is completed, the
blue lights below the LCD screens will be illumi-
nated, indicating that the unit is ready for use.
8. Push firmly up on the lever on the bottom of
the spout cover and hold it up as you lower the
cover into place. CAUTION: Do not push down
on the spout cover without pushing up on the
lever. Damage to the lever will result.
9. Close the door.
Gas Cylinder Removal
Regulator
assembly
Argon
gas
cylinder
Loading ...
Loading ...
Loading ...