Loading ...
Loading ...
Loading ...
16
Accessing the temperature/fan settings
(cont.)
3. Set desired “Wine” temperature by pushing the
buttons next to the up (▲) and down (▼) sym-
bols on the display repeatedly. Because of the
systems energy efficient design, actual cooling
temperature is limited to 25°F lower than the
room temperature displayed, even if the “Wine”
temperature is set lower. NOTE: The bottle bay
temperature rises when the door is opened.
4. Push the Units button repeatedly to switch
between degrees F and degrees C. When you
push the button, the current setting will appear
next the the Room, Wine and Set temperatures
on the display.
5. To select the fan setting, push the bottom left
button to switch between the OFF, ON and MAX
settings. The higher the fan setting, the more
fan noise will be heard.
6. Push Exit.
7. Slide the power switch up to the ON position.
8. Lower the spout cover and close the front door.
Diagnostic Screen
When calling Dacor with questions about your wine
dispensing system, the Customer Service represen-
tative may ask you to access this screen for infor-
mation.
To access the diagnostic screen:
1. From the main service menu (see page 11),
push WineStation Service next to any of the
displays.
1. Push More.
2. Push Diag. Screen. The diagnostic screen will
appear on the display. To exit, push any button
on the control panel.
3. To go back to normal operation, slide the power
switch up to the ON position, then lower the
spout cover and close the front door.
Operating Your Wine Dispensing System
Max Units
°C
▲
▼
Exit
44°F
Set
Room 68°F
Wine 47°F
Cooling On
Current
setting
Measured room
temperature
Measured
bottle bay
temperature
Max Units
°C
▲
▼
Exit
44°F
Set
Room 68°F
Wine 47°F
Cooling On
Current unit setting
Max Units
°C
▲
▼
Exit
44°F
Set
Room 68°F
Wine 47°F
Cooling On
Current setting
Bottle Service
WineStation Service
Loading ...
Loading ...
Loading ...