User Manual - Page 148

For 2020 DODGE JOURNEY.

Loading ...
Loading ...
Loading ...
146 SAFETY
Locating The LATCH Anchorages
The lower anchorages are round bars
that are found at the rear of the seat
cu
shion where it meets the seatback.
They are just visible when you lean
into the rear seat to install the child restraint.
You will easily feel them if you run your finger
along the gap between the seatback and seat
cushion.
Rear Seat Lower Anchorages (Second Row 60/40)
Locating The Upper Tether Anchorages
There are tether strap anchorages
behind each second row seating
po
sition, located on the back of the
seat, near the floor.
Tether Anchorages (Second Row 60/40)
LATCH-compatible child restraint systems will be
eq
uipped with a rigid bar or a flexible strap on
each side. Each will have a hook or connector to
attach to the lower anchorage and a way to
tighten the connection to the anchorage.
Forward-facing child restraints and some
rear-facing child restraints will also be equipped
with a tether strap. The tether strap will have a
hook at the end to attach to the top tether
anchorage and a way to tighten the strap after it
is attached to the anchorage.
Center Seat LATCH
This vehicle has 5 lower LATCH anchorages in
the rear seat. Anchorages A and B are used for
the right outboard position behind the front
passenger (1). Anchorages D and E are used for
the left outboard position behind the driver (3).
Anchorages B and C are used for the center
seating position (2). Do
not
install a
LATCH-compatible child restraint using
anchorages C and D. This is not a
LATCH-compatible position in your vehicle.
You can install up to two child seats using the LATCH
system at the same time. If you are installing three
child restraints, you must use the seat belt to install
the center child restraint. You can use either the
LATCH anchors for positions (1) and (3) or the
vehicle’s seat belt for installing the child seats in the
outboard positions.
Loading ...
Loading ...
Loading ...