Loading ...
Loading ...
Loading ...
Monaural audio cable (not supplied)
Speaker cable (not supplied)
After you have made the Zone 2 connection, set [SURROUND BACK/ZONE2 Priority] to
[ZONE2 Terminals] in the [Speaker Settings] menu.
Note
After you have installed and connected your speakers, be sure to select the speaker pattern you
want using [Speaker Pattern] in the [Speaker Settings] menu.
You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does
not have surround back and height/overhead speakers.
Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network],
[Music Service List], [FM TUNER] and audio signals input from AUDIO IN jacks are output to the
Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN and HDMI IN jacks cannot be output to Zone 2.
[24] Preparation 2. Connecting speakers
Connecting 5.1-channel speaker system with bi-
amplifier connection
You can enhance the sound quality of the front speakers by separately connecting the built-in
amplifiers to tweeters and woofers in a bi-amplifier configuration.
If you are not using surround back speakers or height/overhead speakers, you can connect the
front speakers to the SPEAKERS SURROUND BACK/HEIGHT terminals using a bi-amplifier
connection. Connect each speaker as illustrated below.
Before connecting cables, be sure to disconnect the AC power cord (mains lead).
For details on how to connect speaker cables to the receiver, see “How to connect speaker
cables.”
Connecting front speakers with bi-amplifier connection
Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS
Loading ...
Loading ...
Loading ...