Loading ...
Loading ...
Loading ...
Note
You can only set [Surround Back Speaker Assign] under the following conditions:
The speaker pattern is set to a setting without surround back and height/overhead speakers.
Headphones are not connected.
[Bluetooth Mode] is set to other than [Transmitter].
[162] Adjusting Settings Speaker Settings
Selecting the speaker pattern (Speaker Pattern)
You can select the speaker pattern you want according to your speaker installation.
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
If a speaker pattern with surround back speakers is selected, you cannot set [Height/Overhead
Speakers].
If you select a speaker pattern with the speakers connected to the SPEAKERS SURROUND
BACK/HEIGHT terminals and select [Save], [Zone2 Power] will be set to [Off] automatically.
[163] Adjusting Settings Speaker Settings
Checking the speaker position and the corresponding
The displayed settings vary depending on the speaker pattern you selected.
*
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Speaker Pattern].
2
Select the speaker pattern appropriate to your speaker configuration under
[Listener-level Speakers] by referring to the speaker installation example displayed
on the TV screen.
3
Select the speaker pattern appropriate to your speaker configuration under
[Height/Overhead Speakers] by referring to the speaker installation example
displayed on the TV screen.
4
Select [Save].
5
Loading ...
Loading ...
Loading ...