Loading ...
Loading ...
Loading ...
Confirming active subwoofer setup
When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to
activating the subwoofer. Turn the LEVEL to just before the mid-point.
If you connect a subwoofer with a crossover frequency function, set the value to maximum.
If you connect a subwoofer with an auto standby function, set it to off (deactivated). For
details, refer to the operating instructions of the subwoofer.
Note
Depending on the characteristics of the subwoofer you are using, the setup distance value may be
different from the actual position.
Checking the information of a connected BLUETOOTH
device
You can check the BLUETOOTH device information by pressing DISPLAY MODE on the
receiver repeatedly.
Each time you press DISPLAY MODE, the display will change cyclically as follows:
During BLUETOOTH RX mode: Input you are selecting - BLUETOOTH device name -
Sound field currently applied - Volume level
During BLUETOOTH TX mode: BLUETOOTH device name - Sound field currently applied
- Volume level - Input you are selecting
Menu list (on the display panel)
The following options are available in each menu.
Press AMP MENU to display the menu on the display panel.
Auto Calibration settings [<AUTO CAL>]
Auto Calibration start [A.CAL START]
Auto Calibration type [CAL TYPE] (*1)
FULL FLAT, ENGINEER, FRONT REF, OFF
Calibration Matching [C.MATCH?] (*1)
C.MATCH?YES, C.MATCH? NO
Loading ...
Loading ...
Loading ...