Loading ...
Loading ...
Loading ...
(Crossover Frequency)
You can set the bass crossover frequency of speakers for which [Size] in the [Speaker Settings]
menu has been set to [Small]. A measured speaker crossover frequency is set for each speaker
after the Auto Calibration is performed.
Note
This function does not work in the following cases:
Headphones are connected.
[Bluetooth Mode] is set to [Transmitter].
[Size] for none of the speakers is set to [Small].
The surround back speakers will be set to the same setting as that of the surround speakers.
[161] Adjusting Settings Speaker Settings
Assigning the surround back speaker terminals
(Surround Back Speaker Assign)
You can set the assignment for the SPEAKERS SURROUND BACK/HEIGHT terminals.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Crossover Frequency].
2
Select the speaker for which you want to adjust the crossover frequency on the
screen.
3
Press
/ to set the crossover frequency.
4
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Surround Back Speaker Assign].
2
Select the desired speaker pattern according to the speaker installation example
displayed on the TV screen, then select [Save].
3
Select the setting you want (*).
Off: When none of the following connections is used.
Front B: When using the front B speaker connection.
BI-AMP: When using the bi-amplifier speaker connection.
4
Loading ...
Loading ...
Loading ...