Binder FDL 115 Safety drying chambers, series FDL – 115-liter capacity

User Manual - Page 9

For FDL 115.

PDF File Manual, 77 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
FDL (E2.1) 02/2019 page 9/76
If a warning signal indicates an error condition, no further charging material must be introduced into the
chamber.
DANGER
Explosion and ignition hazard.
Danger of death.
Do NOT introduce any further charging material as long as there is a warning signal.
During and after the drying process, the inner surfaces have got a temperature close to the set-point.
CAUTION
The inner chamber, the exhaust duct, the door gasket, and the access ports will be-
come hot during operation.
Danger of burning.
Do NOT touch the inner surfaces, the exhaust duct, the door gasket, the access ports,
or the charging material during operation.
1.6 Intended use
The BINDER safety drying oven FDL 115 is suitable for drying and burn in of lacquers and similar liquid
coating materials which are containing solvents that can form explosive mixtures with air. The maximally
permitted drying temperature and the maximally permitted quantity of solvent are limited, see chap. 1.9.
The chamber is also suited for coil coating / hot air short cycle applications.
Any component of the charging material must NOT be able to release toxic gases.
Other applications are not approved.
Do NOT use the chamber to warm up coating materials in containers, vessels, etc. or for drying textiles
soaked in solvent.
Do NOT use the chamber for drying purpose if greater quantities of steam or solvent gas leading to con-
densation will be set free.
DANGER
Explosion hazard.
Danger of poisoning.
Danger of death.
Do NOT introduce any energy sources such as batteries or lithium-ion batteries
Do NOT introduce any substance which could lead to release of toxic gases.
Following the instructions in this operating manual and conducting regular maintenance work
(chap. 14.1) are part of the intended use.
The charging material shall not contain any corrosive ingredients that may damage the ma-
chine components made of stainless steel, aluminum, and copper. Such ingredients include
in particular acids and halides. Any corrosive damage caused by such ingredients is excluded
from liability by BINDER GmbH.
Loading ...
Loading ...
Loading ...