Loading ...
Loading ...
Loading ...
FDL (E2.1) 02/2019 page 17/76
For disposal of the transport packing, see chap. 15.1.
Note on second-hand chambers (Ex-Demo-Units):
Second-hand chambers are chambers that were used for a short time for tests or exhibitions. They are
thoroughly tested before resale. BINDER ensures that the chamber is technically sound and will work
flawlessly.
Second-hand chambers are marked with a sticker on the chamber door. Please remove the sticker before
commissioning the chamber.
3.2 Guidelines for safe lifting and transportation
After operation, please observe the guidelines for temporarily decommissioning the chamber (chap. 15.2).
CAUTION
Sliding or tilting of the chamber.
Damage to the chamber.
∅ Do NOT lift or transport the chamber using the door or the handle.
Transport the chamber in its original packaging only.
For moving or shipping, secure the oven with transport straps.
Lift the chamber at the four lower corners with the aid of 4 people and place it on a
transport pallet with wheels. Push the pallet to the desired site and then lift the cham-
ber at its four lower corners from the pallet with the aid of four people.
• Permissible ambient temperature range during transport: -10 °C / 14 °F to +60 °C / 140 °F.
You can order transport packing and pallets for moving or shipping purposes from BINDER service.
3.3 Storage
Intermediate storage of the chamber is possible in a closed and dry room. Observe the guidelines for
temporary decommissioning (chap. 15.2).
• Permissible ambient temperature range during storage: -10 °C / 14 °F to +60 °C / 140 °F.
• Permissible ambient humidity: max. 70 % r.H., non-condensing
When after storage in a cold location you transfer the chamber to its warmer installation site, condensa-
tion may form. Before start-up, wait at least one hour until the chamber has attained ambient temperature
and is completely dry.
3.4 Location of installation and ambient conditions
Set up the safety drying oven FDL on a flat, even and non-flammable surface, free from vibration and in a
well-ventilated, dry location and align it using a spirit level. The site of installation must be capable of sup-
porting the chamber’s weight (see technical data, chap. 17.3). The chambers are designed for setting up
inside a building (indoor use).
CAUTION
Danger of overheating.
Damage to the chamber.
∅ Do NOT set up chambers in non-ventilated recesses.
Ensure sufficient ventilation for dispersal of the heat.
Loading ...
Loading ...
Loading ...