Loading ...
Loading ...
Loading ...
FDL (E2.1) 02/2019 page 16/76
In case of too high drying temperature and /or too high quantity of solvent in the steam room it could be
possible that the concentration of the solvent steam will lead to an explosion. The permitted maximum of
solvent brought into the drying oven and the maximal temperature must not be exceeded.
DANGER
Excessive drying temperature and/or excessive solvent quantity.
Danger of explosion.
Danger of death.
∅ Do NOT exceed the maximum solvent quantity.
∅ Do NOT exceed the maximum drying temperature for the solvent quantity.
Adjust the temperature safety device according to the selected set-point (chap. 12.1).
2.4 Solvent diagram replacement on older devices
Modified solvent diagram from ser.no. 2018xxxxxx6321on.
Note for older devices :
The solvent diagram must be replaced on the following FDL ovens:
• Serial no. type xx-xxxxx
• Serial no. 2017xxxxxxxxxx up to 2018xxxxxx6320
Receive a free replacement sticker (art. no. 6001-0522) from BINDER Service. Stick it over the existing
solvent diagram.
3. Completeness of delivery, transportation, storage, and installa-
tion
3.1 Unpacking, and checking equipment and completeness of delivery
After unpacking, please check the chamber and its optional accessories, if any, based on the delivery
receipt for completeness and for transportation damage. Inform the carrier immediately if transportation
damage has occurred.
The final tests of the manufacturer may have caused traces of the shelves on the inner surfaces. This has
no impact on the function and performance of the chamber.
Please remove any transportation protection devices and adhesives in/on the chamber and on the doors
and remove the operating manuals and accessory equipment.
CAUTION
Sliding or tilting of the chamber.
Damage to the chamber.
∅ Do NOT lift or transport the chamber using the door or the handle.
Lift the chamber from the pallet at the four lower corners with the aid of four people.
If you need to return the chamber, please use the original packing and observe the guidelines for safe
lifting and transportation (chap. 3.2).
Loading ...
Loading ...
Loading ...