Loading ...
Loading ...
Loading ...
©
2020 DJI All Rights Reserved.
37
AGRAS T20
User Manual
Button Combinations Description
Function Button + Aircraft Control Switch Dial
(Right Dial)
Adjust the system volume
Function Button + Spray Rate Dial (Left Dial) Adjust the screen brightness
Function Button + Spray Button Record the screen
Function Button + FPV / Map Switch Button Screenshot the screen
Function Button + 5D Button (up) Return to Homepage
Function Button + 5D Button (down) Open Quick Settings
Function Button + 5D Button (left) Check recently opened apps
Function Button + 5D Button (right) Open App Center
Calibrating the Compass
After the remote controller is used in places with electro-magnetic interference, the compass may need
to be calibrated. A warning prompt will appear if the remote controller’s compass requires calibration.
Tap the warning prompt to start calibrating. In other cases, follow the steps below to calibrate your
remote controller.
1. Power on the remote controller.
2. Swipe down from the top of the screen, tap
, and scroll down and tap Compass.
3. Follow the diagram on the screen to calibrate your remote controller.
4. The user will receive a prompt when the calibration is successful.
Blocking Third-Party Notications
To ensure safe ight, it is recommended to disable third-party notications before each ight. Follow the
steps below to disable third-party notications.
Power on the remote controller. Swipe down from the top of the screen, tap
, then Notications, and
enable Do Not Disturb. After this, all the third-party notications will be displayed in the notication bar
only when the DJI Agras app is in use.
Remote Controller LEDs
Status LED
Battery Level Indicators
The battery level indicators display the battery level of the controller. The status LED displays the linking
status and warnings for control stick, low battery level, and high temperature.
Loading ...
Loading ...
Loading ...