Loading ...
Loading ...
Loading ...
10
©
2020 DJI All Rights Reserved.
AGRAS T20
User Manual
Only use a DJI-approved dongle. The dongle supports various network standards. Use a SIM
card that is compatible with the chosen mobile network provider, and select a mobile data plan
according to the planned level of usage.
The dongle and SIM card enable the remote controller to access specific networks and
platforms, such as the DJI AG platform. Make sure to employ them correctly. Otherwise,
network access will not be available.
Mounting the 4G Dongle and SIM Card
Remove the dongle compartment cover.
Insert the dongle into the USB port with the SIM card inserted
into the dongle, and test the dongle.*
Reattach the cover rmly.
* Test procedure: Press the remote controller power button once, then press again and hold to power the remote controller on.
In DJI Agras, tap
, and select Network Diagnostics. The dongle and SIM card are functioning properly if the status of all the
devices in the network chain are shown in green.
Dongle
Adjusting the Antennas
Lift the antennas and adjust them. The strength of the remote
controller signal is affected by the position of the antennas. When
the angle between the antennas and the back of the remote
controller is 80° or 180°, the connection between the remote
controller and aircraft can reach its optimal performance.
Mounting the RTK Dongle
When using the RTK planning method to plan the operation area,
attach the RTK dongle to the USB-A port on the remote controller.
Loading ...
Loading ...
Loading ...