Loading ...
Loading ...
Loading ...
Dash panel
Multi-function display (MFI)*
Fig. 74 Windscreen wiper lever: button
A
A
and rocker switch
B
.
The multifunction display (MFI) shows you in-
formation on the journey and fuel consump-
tion. It has two automatic memories: 1 - Trip
memory
and
2 - Total memory.
The selected
memory will be shown in the upper right-
hand corner of the display.
Selecting a memory
–
With the ignition switched on, briefly press
button ››› Fig. 74
A
on the window wiper
lever to move from one memory to another.
Resetting a memory
–
Select the memory that you would like to
reset.
–
Press and hold button
A
on the window
wiper lever for at least 2 seconds.
The trip memory 1 collects the travel and
consumption rates from the moment the igni-
tion is switched on until it is switched off. If
the journey is continued within two hours of
switching off the ignition, the new values will
be added to the existing trip recorder memo-
ry. The memory will automatically be deleted
if the journey is interrupted for more than 2
hours.
The
total memory 2 c
o
llects the trip data for
any number of individual journeys (even if
the ignition is switched off for longer than
two hours) up to a total of 19 hours and 59
minutes travel time or 1,999 km distance
travelled. The memory will automatically be
deleted if one of the named values is
reached.
You can switch between the following dis-
plays in the multi-function display (MFI) by
operating rocker switch ››› Fig. 74
B
on the
windscreen wiper lever:
Memory displays
●
Driving speed
●
Journey duration
●
Average speed
●
Distance
●
Operating range
●
Average fuel consumption
●
Current fuel consumption
●
Outside temperature indicator
●
Speed warning
km/h - Driving speed
Driving speed is digitally shown in the dis-
play.
min - Journey duration
The display shows the amount of time which
has elapsed since the ignition was switched
on.
The maximum display value in both memo-
ries is 19 hours and 59 minutes. The memory
will automatically be deleted once this value
has been reached.
Ø km/h (mph) - Average speed
After turning on the ignition, the average
speed will be shown after travelling a dis-
tance of approximately 100 metres. Until
then dashes will appear in the display. The
display will be updated every 5 seconds
while the vehicle is in motion.
km (miles) - Distance travelled
The display shows the distance travelled
since the ignition was switched on.
The maximum display value in both memo-
ries is 1,999 km. The memory will automati-
cally be deleted once this value has been
reached.
»
65
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...