Loading ...
Loading ...
Loading ...
Fuses and bulbs
Changing bulbs
3 Applies to the model: IBIZA ST
Fig. 199 Removing the bulb holder.
–
Remove the bulb holder by pressing the
fastening clip
B
››› Fig. 199
and pulling it
outw
ar
ds.
–
Replace the faulty bulb, rotating it to the
left and outwards.
–
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
Changing the tail light bulbs
(on the rear lid)
Overview of tail lights
3 Applies to the model: IBIZA ST
Lights
on the rear lid Bulb lamps
●
Reverse lights
●
Side lights
●
Fog lights
Lights on the rear lid LED lamps
●
Reverse lights
●
Side light (LED)
●
Fog lights
Accessing the rear lid lights
3 Applies to the model: IBIZA ST
Fig. 200 Lights on the boot.
–
Open the rear lid.
–
On the rear lid lining there is a lid behind
each light.
–
Remove the lid with a flat screwdriver, plac-
ing it in notch
A
››› Fig. 200
.
Ch
an
ging bulbs
3 Applies to the model: IBIZA ST
Fig. 201 Removing the bulb holder.
–
Remove the bulb holder by pressing the
fastening clips
B
››› Fig. 201
and pulling
outw
ar
ds.
–
Replace the faulty bulb, rotating it to the
left and outwards.
–
To refit follow the steps in reverse order,
taking special care when fitting the bulb
holder.
»
205
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...