Loading ...
Loading ...
Loading ...
Operation
WARNING
●
Never drive if the head restraints have been
removed. Risk of injury.
●
Never drive if the head restraints are in an
unsuitable position, there is a risk of serious
injury.
●
After refitting the head restraint, you must
always adjust it properly for height to achieve
optimal protection.
●
Please observe the safety warnings in ›››
in Correct adjustment of front head restraints
on page 33.
Note
●
To fit and remove the rear head restraints,
gently tilt the seat backrest forwards.
●
When fitting the head restraints again, in-
sert the tubes as far as possible into the
guides without pressing the button.
Seat functions
Heated seats*
Fig. 100 Front seat heating switch.
The front seat cushions and backrests can be
heated electrically.
–
Press the corresponding switch ››› Fig. 100
to switch on the seat heating.
–
Press once to connect the heating at maxi-
mum force. The two LEDs illuminate
››› Fig. 100
. After 15 minutes of high inten-
s
ity
, the upper LED goes out, the system is
deactivated for 2 minutes and is then reac-
tivated at low intensity (the lower LED re-
mains on permanently).
–
Press the switch again to set the heating to
minimum force. (The lower LED lights up).
–
To disconnect the heating, press the switch
again.
CAUTION
To avoid damaging the heating elements,
please do not kneel on the seat or apply
sharp pressure at a single point to the seat
cushion and backrest.
Note
The seats are only heated electrically when
the engine is running.
102
Loading ...
Loading ...
Loading ...