Loading ...
Loading ...
Loading ...
Driver assistance systems
–
Press the lower part SET of the rocker
switch ››› Fig. 148
B
once briefly when you
have reached the speed you wish to set.
When you release the rocker switch, the cur-
rent speed is set and held constant.
Adjusting set speed*
The speed can be altered without touching
the accelerator or the brake.
Setting a higher speed
–
Press the upper part RES of the rocker
switch ››› Fig. 148
B
to increase the speed.
The vehicle will continue to accelerate as
long as you keep the rocker switch pressed.
When you release the switch, the new
speed is stored.
Setting a lower speed
–
Press the lower part of the rocker switch
SET–
›››
Fig. 148
B
to reduce the speed.
The vehicle will automatically reduce its
speed for as long as you keep the switch
pressed. When you release the switch, the
new speed is stored.
When you increase speed with the accelera-
tor and then release the pedal, the system
will automatically restore the set speed. This
will not be the case, however, if the vehicle
speed exceeds the stored speed by more
than 10 km/h (6 mph) for longer than 5 mi-
nutes. The speed will have to be stored
again.
Cruise control is switched off if you reduce
speed by depressing the brake pedal. Reacti-
vate the control by pressing once on the up-
per part of the rocker switch RES+ ››› Fig. 148
B
.
Switching off cruise control
temporarily*
Fig. 149 Turn signal and main beam head-
light lever: switch and rocker switch for the
cruise control.
The cruise control system will be switched off
in the following situations:
●
if the brake pedal is depressed,
●
if the clutch pedal is depressed,
●
if the vehicle is accelerated to over
180 km/h (112 mph),
●
when the lever
A
is moved in the direction
of OFF without fully being engaged.
To resume cruise control, release the brake or
clutch pedal or reduce the vehicle speed to
less than 180 km/h (112 mph) and press
once on the upper part of the rocker switch
RES ››› Fig. 149
B
.
Completely switching off the system
Vehicles with a manual gearbox
The system
is completely turned off b
y
mov-
ing the control
A
››› Fig. 149
all the way to
the right
h
and side (OFF engaged), or when
the vehicle is stationary, switching off the ig-
nition.
Vehicles with an automatic gearbox
To completely disengage the system, the se-
lector lever must be placed in one of the fol-
lowing positions: P, N, R or 1 or with the vehi-
cle stopped and the ignition turned off.
151
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...