Loading ...
Loading ...
Loading ...
Advice
–
Remove the bulb by pulling it out and fit-
ting the new one.
–
Installation involves all of the above steps
in reverse sequence.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Main beam headlight
Fig. 182 Main beam headlight.
Fig. 183 Main beam headlight.
–
Raise the bonnet.
–
Move the loop
1
in the direction of the ar-
row and remove the cover ››› Fig. 182
.
–
R
emo
ve connector ››› Fig. 183
2
by pulling
outward.
–
Extract the bulb and fit the replacement so
that it sits correctly into the cut-out on the
reflector.
–
Installation involves all of the above steps
in reverse sequence.
–
Fit the cover and close the strap. Make sure
that the gasket sits well on the casing cover
during the operation.
–
Check whether the new bulb is working.
Dipped beam headlight
Fig. 184 Dipped beam headlights.
Fig. 185 Dipped beam headlights.
–
Raise the bonnet.
–
Move the loop ››› Fig. 184
1
in the direc-
tion of the arrow and remove the cover.
–
Remove connector ››› Fig. 185
2
from the
bulb.
200
Loading ...
Loading ...
Loading ...