Loading ...
Loading ...
Loading ...
The essentials
●
Screw the compressor tyre inflator into the
valve.
●
Repeat the inflation process.
●
If the indicated pressure still cannot be
reached, the tyre is too badly damaged. Stop
and request assistance from an authorised
technician.
●
Disconnect the air compressor. Unscrew
the tyre inflator tube from the tyre valve.
●
When the tyre pressure is between 2.5 and
2.0 bars, continue driving without exceeding
80 km/h (50 mph).
●
Check the pressure again after 10 minutes
›››
page 188
.
››› in TMS (Tyre Mobility System)* on
page 186
››› page 186
With a spare wheel
Fig. 42
Fig. 43
An adapter for the anti-theft wheel bolts*
Towline anchorage
Box spanner for wheel bolts*
Jack*
Wire hook for pulling off the wheel cov-
ers*/wheel bolt cap clip.
1
2
3
4
5
●
Take out the spare wheel and the tools that
are located under the floor panel in the lug-
gage compartment.
●
Take out the wheel cover or the bolt caps.
●
Loosen the bolts with the box spanner (1
turn to the left).
●
Mount the jack on the support points de-
signed for this purpose on the strut
››› Fig. 43
.
●
R
ai
se the vehicle, turning the jack until it is
slightly lifted off the ground.
●
Unscrew the bolts completely and remove
the punctured wheel.
●
Put the spare wheel in place. Screw on the
bolts and tighten them loosely with the box
spanner.
●
Lower the vehicle with the jack. Finish tight-
ening the bolts with the box spanner.
››› in Preparation work on page 183
››› page 183
27
Technical specifications
AdviceOperationSafetyThe essentials
Loading ...
Loading ...
Loading ...