Loading ...
Loading ...
Loading ...
Advice
Changing bulbs. LED lamps
Carry out the same operations as in lights fit-
ted with bulbs.
If necessary, remove the socket, as if it were
a bulb.
If the brake light and/or side light with LEDs
have to be replaced, the tail light must be re-
placed.
Changing the side and interior
bulbs
Turn signals
Fig. 202 Turn signals.
–
Press the turn signal to the left or to the
right to remove the bulb.
–
Remove the bulb holder from the turn sig-
nal.
–
Remove the failed bulb and replace with a
new bulb.
–
Insert the bulb holder in the turn signal
guide until it clicks into place.
–
First fit the turn signal in the opening in the
chassis, fastening the tabs
1
››› Fig. 202
,
and then fit
in the b
ulb as shown by the ar-
row
2
››› Fig. 202
.
Number p
l
ate light
3 Applies to the model: IBIZA/IBIZA SC
–
Insert the flat part of a screwdriver into the
special slot and remove the bulb.
–
Remove the bulb holder, by turning it until
it is free.
–
Change the bulb.
–
Replace the bulb holder, by turning it until
it fits fully.
–
Fit the light into the space and press until
you hear a “click”.
Number plate light
3 Applies to the model: IBIZA ST
Fig. 203 Remove the number plate light.
–
Insert the flat part of a screwdriver into the
special slot and remove the number plate
light from its moulding.
–
Remove the connector and extract the bulb.
After changing the bulb, fit the connector
again.
–
Place the light in its moulding, pressing the
left side. Once it is fitted into place, press
the right side until you hear a click.
206
Loading ...
Loading ...
Loading ...