Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 75
NOTE:
Use the power door lock switch on either front
door trim panel or the key fob to lock and unlock
the liftgate. The manual door locks on the doors
and the driver's door lock cylinder will not lock
and unlock the liftgate.
CLOSING
To manually close the liftgate, grasp the liftgate
closing handle and initiate the lowering of the
liftgate. Release the handle when the liftgate is
partially closed and the momentum will fully
close the liftgate.
To Lock The Liftgate
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the liftgate, pushing the Keyless
Enter-N-Go — Passive Entry lock button located
next to the outside handle release will lock the
vehicle.
The power liftgate may be closed by pushing the
button, located in the upper left trim in the
liftgate opening. Pushing the button will only
close the liftgate. This button cannot be used to
open the liftgate.
NOTE:
The liftgate unlock feature is built into the elec-
tronic liftgate release.
POWER LIFTGATE — IF EQUIPPED
The power liftgate may be opened by
pushing the electronic liftgate release
(refer to “Keyless Enter-N-Go —
Passive Entry” located in “Getting To
Know Your Vehicle” for further information), or
by pushing the liftgate button on the key fob.
Push the liftgate button on the key fob twice
within five seconds to open the power liftgate.
Once the liftgate is open, pushing the button
twice within five seconds a second time will
close the liftgate.
NOTE:
When using the liftgate button on the key fob
to open the liftgate while the vehicle is
locked, only the liftgate will unlock leaving
the other doors to remain locked. Closing the
liftgate will not re-lock the liftgate. The lock
button on the key fob, or the Passive Entry
lock button must be pushed to re-lock.
When using the Passive Entry button to open
the liftgate, and the vehicle doors unlock (if
“Unlock All Doors 1st Press” is selected in the
Passive Entry settings), the liftgate and
vehicle doors must be locked using the lock
button on the key fob, the Passive Entry lock
button, or the lock buttons on the interior
front door panels.
The power liftgate may also be opened or closed
by pushing the liftgate button located on the
front overhead console. If the liftgate is fully
open, the liftgate can be closed by pushing the
liftgate button located on the left rear trim
panel, near the liftgate opening. If the liftgate is
in motion, pushing the liftgate button located on
the left rear trim panel will reverse the liftgate.
WARNING!
Driving with the liftgate open can allow
poisonous exhaust gases into your vehicle.
You and your passengers could be injured by
these fumes. Keep the liftgate closed when
you are operating the vehicle.
2
20_WK_OM_EN_USC_t.book Page 75
Loading ...
Loading ...
Loading ...