Loading ...
Loading ...
Loading ...
116 GETTING TO KNOW YOUR INSTRUMENT PANEL
SRT Speed Warning Indicator Light — If
Equipped
When Set Speed Warning is turned
on, the speed warning telltale will
illuminate in the instrument cluster
with a number matching the set
speed. When the set speed is exceeded, the
indication will light up yellow and flash along
with a continuous chime. Speed Warning can be
turned on and off in the instrument cluster
display. For further information refer to
“Instrument Cluster Display” in this chapter.
The number “55” is only an example of a speed
that can be set.
Speed Warning Indicator Light — If
Equipped
When Set Speed Warning is turned
on, the speed warning telltale will
illuminate in the instrument cluster
with a number matching the set
speed. When the set speed is exceeded, a
single chime will sound along with pop up
message of speed warning exceeded.
When the set speed is exceeded by 1.9mph
(3km/h) or more, the indication will light up
yellow and flash along with a continuous chime
(up to ten seconds or until the speed is no
longer exceeded).
Speed Warning can be turned on and off in the
instrument cluster display. For further
information, refer to “Instrument Cluster
Display Menu Items” in “Getting To Know Your
Instrument Panel.”
NOTE:
The number “55” is only an example of a speed
that can be set.
Cruise Control Ready Indicator Light
This light will turn on when the speed
control has been turned on, but not
set. Refer to “Speed Control — If
Equipped” in “Starting And Operating”
for further information.
Selec Speed Control Indicator Light — If
Equipped
This light will turn on when “Selec
Speed Control” is activated.
To activate “Selec Speed Control”, assure the
vehicle is Four Wheel Drive (4WD) Low and push
the button on the Instrument Panel.
NOTE:
If the vehicle is not in 4WD Low, “To Enter
Selec-Speed Shift to 4WD Low” will appear in
the instrument cluster display.
Valet Mode SRT Indicator Light
This light will turn on when Valet Mode
is active. Refer to the Drive Mode
Supplement for further information.
BLUE INDICATOR LIGHTS
High Beam Indicator Light
This indicator light will illuminate to
indicate that the high beam
headlights are on. With the low beams
activated, push the multifunction
lever forward (toward the front of the vehicle) to
turn on the high beams. Pull the multifunction
lever rearward (toward the rear of the vehicle) to
turn off the high beams. If the high beams are
off, pull the lever toward you for a temporary
high beam on, “flash to pass” scenario.
20_WK_OM_EN_USC_t.book Page 116
Loading ...
Loading ...
Loading ...