Loading ...
Loading ...
Loading ...
274 STARTING AND OPERATING
3. Shift the transmission into NEUTRAL.
4. If vehicle is equipped with Quadra-Lift air
suspension, ensure the vehicle is set to
Normal Ride Height.
5. Using a ballpoint pen or similar object, push
and hold the recessed transfer case
NEUTRAL (N) button (located by the selector
switch) for four seconds. The light behind
the N symbol will blink, indicating shift in
progress. The light will stop blinking (stay on
solid) when the shift to NEUTRAL (N) is
complete. A “FOUR WHEEL DRIVE SYSTEM
IN NEUTRAL” message will appear in the
instrument cluster.
NEUTRAL (N) Button
6. After the shift is completed and the
NEUTRAL (N) light stays on, release the
NEUTRAL (N) button.
7. Shift the transmission into REVERSE.
8. Release the brake pedal for five seconds
and ensure that there is no vehicle
movement.
9. Press and hold the brake pedal. Shift the
transmission back into NEUTRAL.
10. Firmly apply the parking brake.
11. With the transmission and transfer case in
NEUTRAL, push and hold the ENGINE
START/STOP button until the engine turns
off.
12. Place the transmission gear selector in
PARK. Release the brake pedal.
13. Push the ENGINE START/STOP button twice
(without pressing the brake pedal), to turn
the ignition to the OFF mode.
14. Attach the vehicle to the tow vehicle using a
suitable tow bar.
15. Release the parking brake.
NOTE:
Steps 1 through 4 are requirements that
must be met before pushing the NEUTRAL (N)
button, and must continue to be met until the
shift has been completed. If any of these
requirements are not met before pushing the
NEUTRAL (N) button or are no longer met
during the shift, then the NEUTRAL (N) indi-
cator light will flash continuously until all
requirements are met or until the NEUTRAL
(N) button is released.
The ignition must be in the ON/RUN mode for
a shift to take place and for the position indi-
cator lights to be operable. If the ignition is
not in the ON/RUN mode, the shift will not
take place and no position indicator lights will
be on or flashing.
A flashing NEUTRAL (N) position indicator
light indicates that shift requirements have
not been met.
20_WK_OM_EN_USC_t.book Page 274
Loading ...
Loading ...
Loading ...