Loading ...
Loading ...
Loading ...
102 GETTING TO KNOW YOUR INSTRUMENT PANEL
Toggle left or right to select a display with or
without Current Fuel Economy Information.
Range – The display shows the estimated
distance (mi or km) that can be traveled with
the fuel remaining in the tank. When the
Range value is less than 30 miles (48 km)
estimated driving distance, the Range
display will change to a “RANGE LOW”
message. Adding a significant amount of fuel
to the vehicle will turn off the “RANGE LOW”
message and a new Range value will display.
Range cannot be reset through the OK
button.
NOTE:
Significant changes in driving style or vehicle
loading will greatly affect the actual drivable
distance of the vehicle, regardless of the Range
displayed value.
Average – The display shows the average fuel
economy (MPG, L/100 km, or km/L) since
the last reset.
Current – This display shows the current fuel
economy (MPG, L/100 km, km/L) while
driving.
Trip Info
Push and release the up or down arrow button
until the Trip menu title is displayed in the
instrument cluster display. Toggle the left or
right arrow button to select Trip A or Trip B. The
Trip information will display the following:
Distance – Shows the total distance (mi or
km) traveled for Trip A or Trip B since the last
reset.
Average Fuel Economy – Shows the average
fuel economy (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.
Elapsed Time – Shows the total elapsed time
of travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Stop / Start – If Equipped
Push and release the up or down
arrow button on the steering wheel to
scroll to the Stop/Start menu in the
driver interactive display.
For further information on the use and different
modes of the Stop/Start System, refer to “Stop
/ Start System – If Equipped” in “Starting And
Operating”.
Audio
Push and release the up or down arrow button
until the Audio menu title is displayed in the
instrument cluster display.
Stored Messages
Push and release the up or down arrow button
until the Messages Menu Icon is highlighted in
the instrument cluster display. This feature
shows the number of stored warning messages.
Pushing the left or right arrow button will allow
you to scroll through the stored messages.
Screen Setup
Push and release the up or down arrow button
until the Screen Setup Menu Icon/Title is
highlighted in the instrument cluster display.
Push and release the OK button to enter the
submenus and follow the prompts on the
screen as needed. The Screen Setup feature
allows you to change what information is
displayed in the instrument cluster as well as
the location that information is displayed.
20_WK_OM_EN_USC_t.book Page 102
Loading ...
Loading ...
Loading ...