Loading ...
Loading ...
Loading ...
304 IN CASE OF EMERGENCY
7. Remove the lug nuts and wheel.
8. Position the spare wheel/tire on the vehicle
and install the lug nuts with the
cone-shaped end toward the wheel. Lightly
tighten the nuts.
Mounting Spare Tire
9. Lower the vehicle by turning the jack screw
counterclockwise, and remove the jack and
wheel blocks.
10. Finish tightening the lug nuts. Push down on
the wrench while at the end of the handle
for increased leverage. Tighten the lug nuts
in a star pattern until each nut has been
tightened twice. For correct lug nut torque,
refer to “Wheel And Tire Torque Specifi-
cations” in “Technical Specifications” for
further information. If in doubt about the
correct tightness, have them checked with a
torque wrench by an authorized dealer or at
a service station.
Tighten Lug Nuts
11. Lower the jack to the fully closed position
and return it and the tools to the proper
positions in the foam tray.
12. Remove the small center cap and securely
store the road wheel in the cargo area. Turn
the wing nut clockwise until secured.
Storing Road Wheel
CAUTION!
Be sure to mount the spare tire with the valve
stem facing outward. The vehicle could be
damaged if the inflatable spare tire is
mounted incorrectly.
WARNING!
To avoid the risk of forcing the vehicle off the
jack, do not tighten the wheel nuts fully until
the vehicle has been lowered. Failure to
follow this warning may result in serious
injury.
20_WK_OM_EN_USC_t.book Page 304
Loading ...
Loading ...
Loading ...