Loading ...
Loading ...
Loading ...
52 GETTING TO KNOW YOUR VEHICLE
If the windshield or Automatic High Beam
Headlamp Control mirror is replaced, the mirror
must be re-aimed to ensure proper
performance. See a local authorized dealer.
FLASH-TO-PASS
You can signal another vehicle with your
headlights by lightly pulling the multifunction
lever toward you. This will cause the high beam
headlights to turn on, and remain on, until the
lever is released.
AUTOMATIC HEADLIGHTS — IF EQUIPPED
This system automatically turns the headlights
on or off according to ambient light levels. To
turn the system on, rotate the headlight switch
to the A (auto) position.
When the system is on, the Headlight Delay
feature is also on. This means the headlights
will stay on for up to 90 seconds after you place
the ignition switch in the OFF position. To turn
the automatic headlights off, turn the headlight
switch out of the A (auto) position.
NOTE:
The engine must be running before the head-
lights will turn on in the Automatic Mode.
PARKING LIGHTS AND PANEL LIGHTS
To turn on the parking lights and instrument
panel lights, rotate the headlight switch
clockwise. To turn off the parking lights, rotate
the headlight switch back to the O (off) position.
HEADLIGHTS ON AUTOMATICALLY WITH
W
IPERS
If your vehicle is equipped with Automatic
Headlights, it also has this
customer-programmable feature. When your
headlights are in the automatic mode and the
engine is running, they will automatically turn
on when the wiper system is on. This feature is
programmable through the Uconnect system
screen. Refer to “Uconnect Settings” in
“Multimedia” for further information.
If your vehicle is equipped with a “Rain Sensitive
Wiper System” and it is activated, the
headlights will automatically turn on after the
wipers complete five wipe cycles within
approximately one minute, and they will turn off
approximately four minutes after the wipers
completely stop.
Refer to “Windshield Wipers And Washers” in
this chapter for further information.
NOTE:
When your headlights come on during the
daytime, the instrument panel lights will auto-
matically dim to the lower nighttime intensity.
HEADLIGHT DELAY
To aid in your exit, your vehicle is equipped with
a headlight delay that will leave the headlights
on for approximately up to 90 seconds. This
delay is initiated when the ignition is turned OFF
while the headlight switch is on, and then the
headlight switch is cycled off. Headlight delay
can be cancelled by either turning the headlight
switch on then off, or by placing the ignition in
the ON position.
NOTE:
This feature can be programmed through the
Uconnect system. Refer to “Uconnect
Settings” in “Multimedia” for further informa-
tion.
The headlight delay feature is automatically
activated if the headlight switch is left in the
A (auto) position when the ignition is placed
in the OFF position.
20_WK_OM_EN_USC_t.book Page 52
Loading ...
Loading ...
Loading ...