Loading ...
Loading ...
Loading ...
MULTIMEDIA 459
If audio is still not heard, check that fully
charged batteries are installed in the
headphones.
Rear Seat Entertainment Headphones
CONTROLS
The headphone power indicator and controls
are located on the right ear cup.
NOTE:
The rear video system must be turned on before
sound can be heard from the headphones. To
conserve battery life, the headphones will auto-
matically turn off approximately three minutes
after the rear video system is turned off.
Changing the Audio Mode for Headphones
1. Ensure the Remote Control channel/
screen selector switch is in the same
position as the headphone selector switch.
NOTE:
When both the headphone and the remote
control channel selector switches are on
Channel 1, the Remote is controlling
Channel 1 and the headphones are tuned
to the audio on Channel 1.
When both the headphone and the remote
control channel selector switches are on
Channel 2, the remote is controlling
Channel 2 and the headphones are tuned
to the audio on Channel 2.
2. Push the Source button on the remote
control.
3. Pushing the Source button will advance to
the next mode.
4. When the Mode Selection menu appears on
screen, use the cursor buttons on the
remote control to navigate to the available
modes and push the Ok button to select the
new mode.
5. To cancel out of the Mode Selection menu,
push the Back button on the remote control.
REPLACING THE HEADPHONE
B
ATTERIES
Each set of headphones requires two AAA
batteries for operation. To replace the batteries:
1. Locate the battery compartment on the left
ear cup of the headphones, and then slide
the battery cover downward.
2. Replace the batteries, making sure to orient
them according to the polarity diagram
shown.
3. Replace the battery compartment cover.
1 — Power Button
2 — Volume Control
3 — Channel Selection Switch
9
20_WK_OM_EN_USC_t.book Page 459
Loading ...
Loading ...
Loading ...