Loading ...
Loading ...
Loading ...
46 Servicing Your Honda
Fuel System
9. Apply small amount of engine oil to a new
O-ring (23).
Install a new O-ring into the fuel tank groove.
10. Install the fuel pump unit (24) into the fuel tank
(25).
Be careful not to damage the wires.
11. Install the fuel pump plate (26) with its
identification mark (27) facing toward the
front side and facing up.
12. Install the conical spring washers (28), collars
(29), washers (30), stopper cable (31), stopper
cable guide (32) and fuel pump mounting bolts
(33).
Make sure that the convex surfaces of the conical
spring washers are upside.
13. Tighten the fuel pump mounting bolts to the
specified torque in the specified sequence as
shown:
8 lbf·ft (11 N·m, 1.1 kgf·m)
14. Connect the fuel pump connector B (34).
15. Install the stopper cable (31) to the hook (35)
of the frame while holding the fuel tank (25).
16. Connect the fuel line (page 41).
17. Increase the fuel pressure (page 47).
(23) O-ring (new) (25) fuel tank
(24) fuel pump unit
(26) fuel pump plate
(27) identification mark
(25)
(24)
(23)
(27)
(26)
(28) conical spring washers
(29) collars
(30) washers
(31) stopper cable
(32) stopper cable guide
(33) fuel pump mounting bolts
(33)(29)(28)
(31)
(32)
(28) (29)
(33)(30)
1
3
5
2
4
6
(25) fuel tank (34) fuel pump connector B
(31) stopper cable (35) frame hook
(25)
(35)
(34)
(31)
Loading ...
Loading ...
Loading ...