Loading ...
Loading ...
Loading ...
Servicing Your Honda 103
Steering Damper
3. With your CRF on a box or an optional
workstand (front wheel elevated), check that
the steering moves smoothly from side-to-side.
4. Install the number plate (3) by aligning its
holes (7) with the tabs (8) on the steering stem.
Install and tighten the bolts (2).
Route the number plate tab (1) around the
handlebar pad (9) as shown. Make sure that the
brake hose (10) is routed properly in front of
the number plate.
1. Remove the number plate (page 102).
2. Remove the steering damper mounting bolts
(1), collar (2), connector stay (3) and steering
damper (4).
1. Check the damper rod (1) operation.
The damper rod is fully extended and
compressed by hand. Release the damper rod,
then check that it extends to its maximum
length.
If the damper rod does not extend to its maximum
length, refer to an official Honda Service Manual
for disassembly and inspection instructions or see
your dealer.
(1) number plate tab (8) tabs
(2) bolts (9) handlebar pad
(3) number plate (10) brake hose
(7) holes
(1)
(3)
(2)
(7)
(8)
(10)
(9)
Removal
(1) steering damper mounting bolts
(2) collar
(3) connector stay
(4) steering damper
(2)
(3)
(1)
(4)
Inspection
(1) damper rod
(1)
Loading ...
Loading ...
Loading ...