Loading ...
Loading ...
Loading ...
Suspension Adjustment Guidelines
Adjustments for Competition 131
Suspension Adjustment Guidelines
Follow the procedures described below to accurately adjust your CRF, using the methods described on pages 111 – 129. Remember to make all adjustments in
one-click increments. Test ride after each adjustment.
Front Suspension Adjustment
Adjustments for Type of Track
Hard-surfaced track Begin with the standard setting. If the suspension is too stiff/soft, adjust according to the chart below.
Sand track Adjust to a stiffer position.
Example: – Turn the compression damping adjuster to a stiffer position.
Mud track Adjust to a stiffer position because mud build-up increases your CRF’s weight.
Example: – Turn the compression damping adjuster to a stiffer setting.
Adjustments for Too Soft/Stiff Damping
Symptom Action
Soft suspension Initial travel too soft:
• Steering is too quick.
• Front end darts while cornering or riding in a straight line.
– Test stiffer high and low speed compression damping adjustments in one-click
increments.
– Test stiffer high and low speed rebound damping in one-click increments.
Middle travel too soft:
• Front end dives when cornering.
If suspension isn’t stiff in initial travel:
– Test stiffer high and low speed compression damping adjustments in one-click
increments.
If initial travel becomes stiff because of the above adjustment:
– Reduce the high and low speed rebound damping in one-click increments.
– Test softer compression damping adjustments in one-click increments.
Final travel too soft:
• Bottoms on landings.
• Bottoms on large bumps, especially downhill bumps.
If initial and middle travel aren’t stiff:
– Test stiffer high and low speed compression damping adjustments in one-click
increments.
If final travel is soft:
– Increase the fork oil capacity in increments of 0.2 US oz (5 cm
3
).
Entire travel too soft:
• Front end shakes.
• Fork bottoms over any type of terrain.
– Test stiffer high and low speed compression damping adjustments in one-click
increments.
– Increase high and low speed rebound damping in one-click increments.
– Adjust the PSF air pressure.
Loading ...
Loading ...
Loading ...