Loading ...
Loading ...
Loading ...
NOTE: Depending on market region, vehicle
configuration, options purchased, and software version,
your vehicle may not be equipped with Smart Summon.
Smart Summon is designed to allow you to move Model
3 to your location (using your phone's GPS as a target
destination) or to a location of your choice,
maneuvering around and stopping for objects as
necessary.
Smart Summon works with the Tesla mobile
app when your phone is located within approximately
213 feet (65 meters) of Model 3. Using ultrasonic
sensors, cameras, and GPS data, Smart Summon
maneuvers
Model 3 out of parking spaces and around
corners. This is useful for moving Model 3 out of a tight
parking spot, through puddles, or helping you retrieve
your car while carrying packages. You must maintain a
clear line of sight between you and
Model 3 and closely
monitor the vehicle and its surroundings at all times.
CAUTION:
Ensure all cameras and sensors are
clean. Unclean cameras and sensors, as well as
environmental conditions such as rain and faded
lane markings, can aect Autopilot performance.
WARNING:
Smart Summon is designed and
intended for use only on parking lots and
driveways located on private property where the
surrounding area is familiar and predictable. Do
not use Smart Summon on public roads.
WARNING:
Smart Summon must only be used on
paved surfaces.
WARNING:
Smart Summon is a BETA feature. You
must continually monitor the vehicle and its
surroundings and stay prepared to take
immediate action at any time. It is the driver's
responsibility to use Smart Summon safely,
responsibly, and as intended.
WARNING:
Smart Summon may not stop for all
objects (especially very low objects such as some
curbs, or very high objects such as a shelf) and
may not react to all trac. Smart Summon does
not recognize the direction of trac, does not
navigate around empty parking spaces, and may
not anticipate crossing trac.
WARNING:
Smart Summon's performance
depends on the ultrasonic sensors, the visibility of
the cameras, and the availability of an adequate
cellular signal and GPS data.
WARNING:
When using Smart Summon, you must
maintain a clear line of sight between you and
Model 3 and stay prepared to stop the vehicle at
any time by releasing the button on the mobile
app.
Before Using Smart Summon
•
Download the latest version of the Tesla mobile app
to your phone, and ensure your phone has cellular
service and GPS enabled.
• Your phone must be connected to Model 3 and
located within approximately
213 feet (65 meters).
• The vehicle's Autopilot cameras must be fully
calibrated (see
Drive to Calibrate Cameras on page
81).
• You must have a clear line of sight to Model 3.
• Model 3 must be in Park, not charging, and all doors
and trunks must be closed.
Using Smart Summon
1. Open the Tesla mobile app, and press SUMMON.
2.
Press the Smart Summon icon located in the center
of the image of your Model 3. It may take several
seconds for Smart Summon to start up.
NOTE: You can use Standby Mode to eliminate the
delay that occurs when Smart Summon is starting up
(see
Standby Mode on page 108).
The mobile app displays a map with a blue circle,
which represents the maximum proximity of 213 feet
(65 meters) that you must maintain between your
phone and Model 3. The blue dot on the map
represents your location, and the red arrow
represents the location of Model 3.
3.
Position yourself anywhere within the blue circle
where you have a clear line of sight to Model 3.
4.
You can now operate Smart Summon using either of
these modes:
◦
COME TO ME mode: Press and hold the COME TO
ME button. Model 3 moves to your GPS location.
As you move, Model 3 follows you. When Model 3
reaches you, it stops and shifts into park.
◦
GO TO TARGET mode: Touch the crosshair icon
then drag the map to position the pin on a
chosen destination. Press and hold the
GO TO
TARGET button. Model 3 moves to the
destination. When reaching the location, Model 3
stops and shifts into Park and the mobile app
displays a message indicating that Summon has
completed.
NOTE: To subsequently change the location, lift
your finger, reposition the map, then press and
hold
GO TO TARGET again.
To stop Model 3 at any time, simply release the
COME TO ME or GO TO TARGET button.
The map's crosshair icon toggles
between
GO TO TARGET and COME TO
ME modes. When COME TO ME mode is
selected, the icon is blue.
NOTE: The map also has an icon that
allows you to display/hide satellite
imagery.
Smart Summon
107Autopilot
Loading ...
Loading ...
Loading ...