Loading ...
Loading ...
Loading ...
Emergencies
Front towline anchorage
Fig. 45
Right side of the front bumper: remove
the co
ver.
Fig. 46 Right side of the front bumper: towline
anchor
age in position.
The housing of the removable towline an-
chor
age is on the right side of the front bump-
er underneath a cover
›››
Fig. 45.
The towing eye should always be kept in the
vehicle.
Bear in mind the instructions for towing
›››
page 52.
Fitting the towline anchorage
●
Remove the towing eye from the vehicle
tool kit in the luggage compartment
›››
page 40.
●
Remove the cover by pressing down on its
left-hand side and leave it hanging from the
vehicle
›››
Fig. 45.
●
Screw the towing eye in the housing by
turning it as far as it will go anticlock-
wise
›››
Fig. 46
›››
. Use a suitable object
that can compl
etely and securely tighten the
towing eye in its housing.
●
After towing, unscrew the towing eye
clockwise with a suitable object.
●
Replace the cover and tighten on its right
side until the tab snaps into the bumper.
●
Clean the towing eye if necessary and then
store it in the luggage compartment along
with the other vehicle tools.
CAUTION
The towing eye must always be completely
and firmly tight
ened. Otherwise, it could be
released while towing and tow-starting.
Make sure that there are no objects that
prevent the eyebolt being screwed.
Rear towline anchorage
Fig. 47
On the right side of the rear bumper:
r
emove the cover.
Fig. 48 Right side of the rear bumper: towline
anchor
age in position.
The housing of the screw towing eye is on the
right side of the r
ear bumper behind a lid
›››
Fig. 47.
Bear in mind the instructions for towing
›››
page 52.
54
Loading ...
Loading ...
Loading ...