Loading ...
Loading ...
Loading ...
Operation
Variable luggage compartment
fl
oor
Fig. 113 Variable luggage compartment floor:
r
aised position;
lowered position.
Fig. 114 Variable luggage compartment floor:
inclined position.
Variable floor in high position
●
To move from the low position to the high
position, lift the fl
oor using the handle
›››
Fig. 113
1
, and pull it back until the front
of the fl
oor has fully passed the supports
2
.
●
Move the floor forward over the supports as
f
ar as the rear seat backrest and then lower
the floor with the handle
1
.
V
ariable floor in low position
●
To move from the high position to the low
position, lift the floor using the handle
›››
Fig. 113
1
, and pull it back until the front
of the fl
oor has fully passed the supports
2
.
●
Now let the front part fall to the floor and
slide the fl
oor forwards as far as the rear seat
backrest; lower the floor at the same time
with the handle
1
.
Variable floor in the tilted position
When the v
ariable floor is tilted you can ac-
cess the spare wheel or anti-puncture kit
area.
●
Lift the variable floor in the high position us-
ing handle
›››
Fig. 113
1
, pull it up and push it
t
owards the backrest of the rear seats until it
folds along the hinge line and the movable
part of the floor is resting on itself.
●
Rest the floor on its housings
›››
Fig. 114 (ar-
rows).
WARNING
●
Al
ways secure objects, even when the
luggage compartment floor is properly lif-
ted.
●
Only objects that do not protrude more
than 2/3 the height of the floor may be car-
ried between the rear seat and the raised
luggage compartment floor.
●
Only objects that do not weigh than ap-
proximately 7.5 kg may be carried between
the rear seat and the raised luggage com-
partment floor.
CAUTION
●
The maximum w
eight that can be loaded
on the luggage compartment variable floor
in the top position is 100 kg.
●
Do not let the luggage compartment
floor fall when closing it. Always carefully
132
Loading ...
Loading ...
Loading ...