Loading ...
Loading ...
Loading ...
Operation
To reset, turn switch
›
››
Fig. 99:
Value Vehicle load status
a)
Two front occupants, luggage compart-
ment empt
y
All seats occupied, luggage compart-
ment empt
y
All seats occupied, luggage compart-
ment full
. With trailer and minimum
drawbar load.
Driver only, luggage compartment full
With tr
ailer and maximum drawbar load.
a)
If the vehicle load does not correspond to those
sho
wn in the table, it is possible to select intermediary
positions.
Dynamic headlight range control
The control is not mounted in vehicles with
dynamic headlight range control. The head-
light range is automatically adjusted accord-
ing to the vehicle load status when they are
switched on.
WARNING
Heavy objects in the vehicle may mean
that the headlights dazzl
e and distract oth-
er drivers. This could result in a serious ac-
cident.
●
Adjust the light beam to the vehicle load
status so that it does not blind other driv-
ers.
Driving abroad
The light beam of the dipped beam lights is
asymmetric: the side of the r
oad on which
you are driving is lit more intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution of the HIGH headlights
allows the specific “tourist light” values to be
met without the need for stickers or changes
being made to the settings.
For ECOLED headlamps, it is necessary to
lower the mechanical adjustment of the
headlamps by 0.15° (2.6 cm at 10 m). To do
this, open the bonnet and adjust the vertical
adjustment screws on both headlights. When
the vehicle returns to its country of origin, the
mechanical adjustment must be reset to its
original status. If you do not have experience
with this type of adjustment, SEAT recom-
mends that you go to a technical service
centre.
Note
“Tourist light” is only allowed temporarily. If
you ar
e planning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights.
Interior lights
Lighting of the instrument panel
,
displays and switches
Depending on the model, the lighting of the
instrument clust
er and switches can be ad-
justed in the infotainment system, using the
button > Settings > Light > Interi-
or lighting button; OR: > Interior
settings > Light > Instrument clus-
ter
›››
page 92.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the function ac-
tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
120
Loading ...
Loading ...
Loading ...