User Manual - Page 82

For MII ELECTRIC 2021.

Loading ...
Loading ...
Loading ...
Operation
The “Leaving Home” lighting switches off
in the f
ollowing cases:
Automatically, when the “Leaving Home”
delay period ends (default 30 sec).
When the vehicle is locked using the remote
control.
When the light switch is turned to position .
With the ignition is switched on.
Note
To activate the “Coming Home” and “Leav-
ing Home” function, the r
otary light switch
must be in position  and the light sensor
must detect darkness.
Hazard warning lights
Fig. 81
Dash panel: hazard warning lights
s
witch
The hazard warning lights are used to draw
the att
ention of other road users to your vehi-
cle in emergencies.
If your vehicle breaks down:
1. Park your vehicle at a safe distance from
moving traffic.
2. Press the button to switch on the hazard
warning lights
.
3. Switch the ignition off.
4. Apply the handbrake.
5. Move the selector lever to position P.
6. Use the warning triangle to draw the at-
t
ention of other road users to your vehicle.
7. Always take the vehicle key with you when
you leave the vehicle.
All turn signals flash simultaneously when the
hazard warning lights are switched on. The
two turn signal turn signal lamps and the
turn signal lamp in the switch will flash at
the same time. The simultaneous hazard
warning lights also work when the ignition is
switched off.
WARNING
The risk of an accident increases if your ve-
hicl
e breaks down. Always use the hazard
warning lights and a warning triangle to
draw the attention of other road users to
your stationary vehicle.
Note
The batt
ery will run down if the hazard
warning lights are left on for a long time,
even if the ignition is switched off.
The use of the hazard warning lights de-
scribed here is subject to the relevant stat-
utory requirements.
Headlight range control
Fig. 82
Next to the steering wheel: headlight
r
ange control.
The headlight range control
Fig. 82 is
modified according to the value of the head-
light beam and the vehicle load status. This
offers the driver optimum visibility and the
headlights do not dazzle oncoming drivers
.
The headlights can only be adjust
ed when
the dipped beam is switched on.
80
Loading ...
Loading ...
Loading ...