Loading ...
Loading ...
Loading ...
Safety
from tipping forward in the event of impact.
Chil
d seats fitted with a support bracket
should only be used in the passenger seat
and side rear seats
›››
. For the assembly of
this t
ype of seat you should also consult the
list of approved vehicles for this assembly,
available in the instructions for child restraint
systems.
Recommended systems for attaching
child seats
SEAT recommends attaching child seats as
follows:
●
Baby carriers or child seats in the oppo-
site direction of travel: ISOFIX and support
bracket or i-Size.
●
Child seats in the direction of travel: ISO-
FIX and Top Tether.
WARNING
Incorrect use of the support bracket can
cause serious or f
atal injury.
●
Make sure the support bracket is correct-
ly and safely installed.
Fit a child seat with the ISOFIX / i-Size and Top Tether system
Fig. 23 Rear seat: ISOFIX/i-Size securing rings.
Fig. 24 Rear seats: fitting a child seat with the
ISOFIX syst
em.
Child seats can be secured quickly, easily
and saf
ely on the rear seats with the ISOFIX/i-
Size and Top Tether system.
Two “ISOFIX” retaining rings are fitted on each
rear side seat. The “ISOFIX” rings are located
between the rear seat backrest and the seat
cushioning
›››
Fig. 23. The Top Tether rings
are located on the rear part of the rear seat
backrests (behind the backrest or in the lug-
gage compartment)
›››
page 32.
To understand the compatibility of the ISO-
FIX/i-Size systems in the vehicle, check the ta-
ble below.
30
Loading ...
Loading ...
Loading ...