Loading ...
Loading ...
Loading ...
Air conditioning
few pre-programmed departure times. The
st
ationary air conditioning is managed
through an application installed on a mobile
phone.
Managing the stationary air conditioning
●
Automatically by programming and acti-
vating a departure time.
●
Manually with the corresponding applica-
tion installed on a mobile phone and the igni-
tion off.
Managing the stationary air conditioning
●
Press the button on the air conditioning
control panel.
●
Automatically at the scheduled departure
time or after the programmed operating time
has elapsed.
●
Automatically when the charge level of the
high-voltage battery drops too low
›››
page 159.
●
Manually with the corresponding applica-
tion installed on a mobile phone.
Air conditioning operating time
The operating time may vary depending on
the type of control and the status of the high-
voltage battery (whether it is charging or
not).
In the event of manual control
●
Charging connector plugged in. 15 minutes
●
Charging connector not plugged in. 10 mi-
nutes
In the event of a scheduled departure time
●
Charging connector plugged in. 30 minutes
of pre-run time
●
Charging connector plugged in. 15 minutes
of post-run time
●
Charging connector not plugged in. 15 mi-
nutes of pre-run time
●
Charging connector not plugged in. 5 mi-
nutes of post-run time
Operation without the charging connector
plugged in
The operation of the stationary air condition-
ing must be activated with the mobile phone
if the charging connector is not plugged in.
This setting is memorised in the vehicle.
The stationary air conditioning will not start
even if it has been programmed if the option
that allows air conditioning without the
charging connector being plugged in has not
been activated.
When the charging connector is not plugged
in, the stationary air conditioning receives the
necessary electrical power from the high-
voltage battery.
Operation with the charging connector
plugged in
When the charging connector is not plugged
in, the stationary air conditioning receives the
necessary electrical power from the high-
voltage battery. The operating possibilities of
the stationary air conditioning depend on the
type of charging process:
●
Charging with alternating voltage (charg-
ing with AC): The vehicle can only be charg-
ed or heated. If a departure time has been
programmed, the high-voltage battery is
charged first and the passenger compart-
ment is then heated or cooled. The charging
process is prolonged if the stationary air con-
ditioning is manually connected with the cor-
responding application installed on the mo-
bile phone.
●
Charging with direct current (charging with
DC): The vehicle can only be heated/cooled
during the charging process. The charging
station may be disconnected as soon as the
high-voltage battery is fully charged. The
passenger compartment will only be heat-
ed/cooled if the air conditioning option with-
out external power is activated.
If a departure time has been programmed
through the corresponding application, the
vehicle will calculate the previous time that
the stationary air conditioning needs. It can
be a maximum of 30 minutes.
»
105
Loading ...
Loading ...
Loading ...