User Manual - Page 28

For MII ELECTRIC 2021.

Loading ...
Loading ...
Loading ...
Safety
Any w
ork on the head-protection airbag
system or removal and installation of the
airbag components for other repairs (such
as removal of the roof lining) should only
be performed by a specialised workshop.
Otherwise, faults may occur during the air-
bag system operation.
The side and head airbags are managed
through sensors located in the interior of
the front doors. To ensure the correct oper-
ation of the side and curtain airbags nei-
ther the doors nor the door panels should
be modified in any way (e.g. fitting loud-
speakers). If the front door is damaged, the
airbag system may not work correctly. All
work carried out on the front door must be
done in a specialised workshop.
Transporting children
saf
ely
Safety for children
Introduction
For safety reasons, as we have learned from
accident st
atistics, we recommend that chil-
dren under 12 years of age travel in the rear
seats. Depending on their age, height and
weight, children travelling in rear seats must
use a child seat or a seat belt. For safety rea-
sons, the child seat should be installed in the
rear seat, behind the front passenger seat or
in the centre back seat.
The physical laws involved and the forces
acting in a collision apply also to children
page 16. But unlike adults, children do not
have fully developed muscle and bone struc-
tures. This means that children are subject to
a greater risk of injury.
To reduce the risk of injuries, children must al-
ways use special child restraint systems
when travelling in the vehicle.
We recommend the use of child safety prod-
ucts from the SEAT Original Accessories Pro-
gramme, which includes systems for all ages
made by “Peke” (not for all countries) (see
www.seat.com).
These systems have been especially de-
signed and appr
oved, complying with the
ECE-R44. regulation.
SEAT recommends securing the child seats
shown on the website as described below:
Child seats in the opposite direction of trav-
el (group 0+): ISOFIX and support foot (RÖ-
MER BABY SAFE PLUS SHR II + ISOFIX BASE /
PEKE G0 I-SIZE + I-SIZE BASE).
Child seats in the direction of travel (group
1): ISOFIX and Top Tether (RÖMER DUO PLUS
+ TOP TETHER / PEKE G1 TRIFIX I-SIZE).
Child seats facing the direction of travel
(group 2): safety belt and ISOFIX (RÖMER
KIDFIX XP).
Child seats facing the direction of travel
(group 3): safety belt and ISOFIX (RÖMER
KIDFIX XP).
Follow the manufacturer's instructions and
observe any statutory requirements when in-
stalling and using child seats. Always read
and note
page 28.
We recommend you always carry the manu-
facturer's Child Seat Instruction Manual to-
gether with the on-board documentation.
26
Loading ...
Loading ...
Loading ...