User Manual - Page 216

For MII ELECTRIC 2021.

Loading ...
Loading ...
Loading ...
Technical data
Technical data
Indications about the
t
echnical data
Important information
Introduction
The values indicated in the technical data
may diff
er depending on optional equipment
or version of the model, as well as in the case
of special vehicles and equipment for certain
countries.
The information in the official vehicle docu-
mentation takes precedence at all times.
Abbreviations used in the Technical Speci-
fications section
kW Kilowatt, engine power measurement.
PS
Pferdestärke (horsepower), formerly
used t
o denote engine power.
rpm, 1/min Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
Vehicle identification data
Vehicle identification number
The v
ehicle identification number (vehicle ID
number) can be read from the outside of the
vehicle through a window located on the
windscreen. This viewer is located in the low-
er part of the windscreen. The vehicle identifi-
cation number (chassis number) is also stam-
ped on the right water drain channel. The wa-
ter drain channel is located between the sus-
pension tower and the wing. Open the bonnet
to read the vehicle identification number .
Type plate
The type plate is located on the vehicles right
hand door frame. Vehicles for certain export
countries do not have a type plate.
Filling capacities
Capacity of the windscreen washer fluid con-
t
ainer
Windscreen washer
fluid cont
ainer
approx. 3 litres
Weights
Load on the roof
The maximum authorised l
oad on the roof of
your vehicle is 50 kg.
Empty weight, total weight, axle loads
The empty weight of the vehicle with driver
(75 kg) was calculated according to the (EU)
1230/2012 standard. Optional equipment can
increase the empty weight, which means that
the possible useful load decreases propor-
tionally.
WARNING
The values indicated for the maximum per-
mitt
ed weights must not be exceeded.
There is a risk of accident and damage!
214
Loading ...
Loading ...
Loading ...