Loading ...
Loading ...
Loading ...
168
Specifying printing
Using the camera, you can specify the still images before you print images
at a shop or with your printer. Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You cannot specify the number of images to be printed.
You can date images when printing them. The position of the date (inside
or outside the image, character size, etc.) depends on your printer.
MENU button t 1 t [Specify Printing] t [Date Imprint] t
[On]
Note
• This function may not be available, depending on the printer.
Specifying DPOF
1 MENU button t 1 t [Specify Printing] t [DPOF Setup]
t [Multiple Img.]
2 Select the image with b/B on the multi-selector, then press the
center of the multi-selector.
3 Place a mark by pressing the center of the multi-selector.
• To unspecify DPOF, select the image again, then press the center of the
multi-selector.
4 Press the MENU button.
5 Select [OK] with v, then press the center of the multi-selector.
Date Imprint
Loading ...
Loading ...
Loading ...