Loading ...
Loading ...
Loading ...
121
Advanced shooting
Flash control
MENU button t 2 t [Flash control] t Select the desired
setting
ADI: Advanced Distance Integration
TTL: Through the lens
• When [ADI flash] is selected, using a lens that has a distance encoder
feature can provide more accurate flash compensation by utilizing
distance information.
Notes
• When the distance between the subject and the flash cannot be determined (wireless
flash shooting using a flash, shooting with an off-camera flash using a cable,
shooting with a macro twin flash, etc.), the camera automatically selects Pre-flash
TTL mode.
• Select [Pre-flash TTL] in the following cases, as the camera cannot perform flash
compensations with ADI flash.
– A wide panel is attached to the HVL-F36AM flash.
– A diffuser is used for flash shooting.
– A filter with an exposure factor, such as an ND filter, is used.
– A close-up lens is used.
• ADI flash is only available in combination with a lens that is provided with a
distance encoder. To determine if the lens is equipped with a distance encoder, refer
to the operating instructions supplied with the lens.
• This item cannot be set when the exposure mode is set to Sweep Panorama, or [Night
Scene]/[Hand-held Twilight] in Scene Selection.
ADI flash This method controls the lighting of the flash, factoring in the
focus distance information and light metering data from the
pre-flash. This method enables an accurate flash
compensation with virtually no effect from the reflection off
the subject.
Pre-flash TTL This method controls the amount of flash light depending on
the data only from pre-flash light metering. This method is
susceptible to the reflection off the subject.
Loading ...
Loading ...
Loading ...