Loading ...
Loading ...
Loading ...
112
Selecting the drive mode
Bracket shooting allows you to shoot several images, each with different
degrees of exposure. Specify the value of deviation (steps) from the base
exposure, and the camera shoots 3 or 5 images while automatically shifting
the exposure.
Notes
• When the exposure mode is set to M and the ISO sensitivity is set to other than
[AUTO], the exposure is shifted by adjusting the shutter speed. When the ISO
sensitivity is set to [AUTO], the exposure is shifted by adjusting the ISO sensitivity.
• When you adjust the exposure, the exposure is shifted based on the compensated
value.
• The bracket cannot be used when the exposure mode is set to Auto Mode, Sweep
Panorama, Tele-zoom Continuous Priority AE, or Scene Selection.
• When the flash is fired, flash bracket, which shifts the amount of flash light, is
selected, even if [Bracket: Cont.] is selected. To shoot, press the shutter button shot
by shot.
Bracket: Cont./Single Bracket
1 (Drive) button t (Bracket: Cont.) or (Single
Bracket) t Select the desired bracket step and the number of
images with b/B on the multi-selector
2 Adjust the focus and shoot the subject.
The base exposure is set at the first shot in the bracket.
• Press and hold the shutter button until recording stops when [Bracket:
Cont.] is selected.
• Press the shutter button shot by shot when [Single Bracket] is selected.
Base exposure
– direction
+ direction
Loading ...
Loading ...
Loading ...